JL Audio MV600/6i 600W RMS 6-Channel Full-Range Class D Marine Amplifier with Integrated DSP (010-03338-00)

Build a capable onboard audio system with the JL Audio MV600/6i, a 6-channel full-range marine amplifier with integrated dsp engineered for demanding marine audio applications. Rated at 600 watts RMS total under the applicable manufacturer test conditions, it combines efficient power delivery with flexible installation options. Six independent full-range channels with integrated DSP and JLid networking.

Key Features

• Integrated digital signal processing (DSP) with JL Audio TüN software
• NexD2 Class D switching technology for efficient, clean output
• JLid communications for compatible system controllers and networking
• Configurable crossovers, equalization, signal routing and time alignment
• Marine-ready construction with protection-oriented thermal management

Detailed Technical Specifications

• Power @ 14.4V, 4 ohms: 75W RMS x 6
• Power @ 14.4V, 2 ohms: 100W RMS x 6
• Power @ 14.4V, 4 ohms bridged: 200W RMS x 3
• Amplification: NexD2 Class D
• DSP Resolution: 24-bit / 96kHz
• DSP Tools: TüN software; 10-band EQ, adjustable crossovers, phase/polarity and time alignment
• Audio Inputs: 8 configurable RCA/speaker-level inputs
• Processed Preamp Outputs: 6 channels, up to 4V RMS
• USB Setup: USB-B port; 6 ft USB-A to USB-B cable
• JLid Networking: Supported, with compatible accessories
• Recommended Power / Protection: 4 AWG power/ground and 50A fuse
• Environmental Protection: IPX2 when vertically mounted with terminals facing down
• Dimensions: 14" W x 2-1/8" H x 8-3/8" D

Compatibility

Compatible with appropriate marine speakers and/or subwoofers within the amplifier’s permitted impedance and power limits. DSP configuration uses JL Audio TüN; JLid-based accessories and system networking require compatible JLid components. Not a universal plug-and-play interface for other amplifier brands.

Installation Notes

Follow the model-specific JL Audio installation manual for correct conductor sizes, system fusing, mounting orientation, ventilation, load limits and signal setup. Additional wiring and installation materials may be required.

What's in the Box

• MV600/6i 6-channel amplifier
• Power connector
• Three 10-inch speaker output harnesses
• 6-foot USB Type-A to Type-B cable
• Seven RCA terminal covers (installed)
• Four 1-inch stainless-steel mounting screws
• 2.5mm Allen wrench
• 3mm Allen wrench
• Connection guide
• Online registration card