Enhance your boat’s low-frequency performance with the JL Audio M6 8-inch marine subwoofer. Built for infinite-baffle installations, the single 4-ohm driver can add impactful bass without requiring a conventional large sealed enclosure, while its white Classic Grille coordinates with a traditional marine interior.
Key Features
- 200W RMS continuous power handling
- 8" marine bass driver with mica-filled polypropylene cone
- 4-ohm single-voice-coil configuration
- Infinite-baffle capable, with alternate enclosure options per JL Audio guidance
- Classic white grille and corrosion-resistant construction
Detailed Technical Specifications
-
Diameter: 8"
-
RMS Power Handling: 200W RMS
-
Nominal Impedance: 4 ohms, single voice coil
-
Sensitivity: 86.8dB (1W/1m)
-
Cone: Mica-filled injection-molded polypropylene
-
Surround: Synthetic rubber
-
Mounting Cutout Diameter: 7-5/16"
-
Mounting Depth: 5-1/16"
-
Frame Width: 8.82"
-
Free-Air / Infinite-Baffle: Yes
-
Recommended Sealed Box: 2.0 ft³ nominal; 1.5 ft³ minimum
-
Recommended Ported Box: 1.5 ft³ nominal
-
Free-Air Thiele-Small Parameters: Fs 54.92Hz; Qts 0.787; Vas 15.29 L; Xmax 13.5mm
-
LED Illumination: None
-
Grille: One white Classic Grille
Compatibility
Connect to a 4-ohm-capable subwoofer amplifier and choose an enclosure or infinite-baffle location consistent with JL Audio installation recommendations.
Installation Notes
Verify mounting surface, clearance and air-volume conditions; maintain waterproof terminations and use a suitable low-pass crossover.
What's in the Box
- One M6-8IB-C-GwGw-4 8-inch marine subwoofer
- One white Classic Grille
- Six 1-1/2-inch stainless-steel mounting screws
- Six stainless-steel flat washers
- Owner’s manual