Skip to product information
DS18 PRO-X694BM PRO-X 6x9" 200W RMS 4-Ohm Midrange Loudspeaker with Bullet, Red, Single
1/7

DS18 PRO-X694BM PRO-X 6x9" 200W RMS 4-Ohm Midrange Loudspeaker with Bullet, Red, Single

UPC: 810005181877
Out of stock
$ 84.95
Full Factory DS18 Warranty

Factory Authorized Retailer

25 Years of Excellence in Customer Service

The DS18 PRO-X694BM is an individually sold 6x9-inch high-output midrange loudspeaker incorporating an aluminum bullet-style center structure. Built for vocal and midrange projection in custom car-audio systems, its high sensitivity helps deliver substantial output when used with a properly matched amplifier and high-pass crossover.

Key Features

  • 6x9" pro-audio midrange driver with integrated aluminum bullet center
  • 200W RMS continuous power handling and 400W maximum manufacturer rating
  • 96dB sensitivity enables high acoustic output
  • Ferrite magnet and 1.5" CCAW voice coil on Kapton former
  • Non-pressed paper cone, cloth surround, and steel basket
  • Distinctive gloss-red bullet and basket finish
  • Protective speaker grille included

Technical Specifications

  • Speaker size: 6x9" (152 x 228mm)
  • Impedance: 4 ohms
  • RMS power handling: 200W
  • Maximum power handling: 400W
  • Sensitivity (1W/1m): 96dB
  • Frequency response: 100Hz–12.5kHz
  • Recommended high-pass crossover: 120Hz
  • Voice-coil diameter: 1.5" (38.6mm)
  • Voice-coil winding: CCAW; former: Kapton
  • Cone: non-pressed paper; surround: cloth
  • Basket: steel, glossy red
  • Bullet: aluminum, glossy red
  • Magnet: ferrite; magnet weight: 27 oz
  • Equivalent volume (Vas): 20.38L / 0.719 cu ft
  • Free-air resonance (Fs): 120Hz
  • Total Q (Qts): 0.64
  • Electrical Q (Qes): 0.731
  • Mechanical Q (Qms): 5.166
  • One-way excursion (Xmax): 7.7mm
  • DC resistance (Re): 3.2 ohms
  • Voice-coil inductance (Le): 3.86mH
  • Cone area (Sd): 207.34 sq cm
  • Motor strength (BL): 6.544
  • Displacement volume: 0.32L
  • Overall front dimensions: 9.25" x 6.5" (235 x 165mm)

Installation & Setup

  • Use a 4-ohm-capable amplifier sized to the loudspeaker’s continuous rating
  • Apply the manufacturer’s recommended 120Hz high-pass crossover or an appropriate system-specific setting
  • Check aperture, screw-hole and mounting-depth clearances in a custom baffle before cutting
  • An additional subwoofer and/or tweeter may be needed for the full intended system bandwidth

Compatibility

  • Sold as one midrange loudspeaker, not a stereo pair
  • Designed for car-audio/custom pro-audio-style installations; not advertised as a waterproof marine speaker

What's in the Box

  • One PRO-X694BM 6x9" midrange loudspeaker
  • Protective grille

Related products