Marine electronics you can trust
Golight 30204ST Stryker ST LED Spot Searchlight, Permanent Mount, Hardwired Dash Remote, 12V, White
The Golight 30204ST Stryker ST LED Spot searchlight combines a powerful, tightly focused LED beam with precise remote-controlled pan and tilt for workboats, service vehicles and other 12V applications. This white model features a permanent mounting configuration and a hardwired dash controller for operation from a fixed control position.
Key Features & Benefits
- Focused LED Spot Performance: 544,000 candela and an 8° spot beam with a maximum rated distance of 4,839 feet.
- Precise Remote Positioning: 370° horizontal rotation and 135° vertical tilt for directing light from the operator position.
- Advanced Stryker ST Functions: On-command home positioning, simultaneous pan and tilt, speed selection and selectable control of compatible multiple-light systems.
- Mounting Configuration: Secure permanent installation on a selected mounting surface.
- Remote Configuration: Hardwired dash-mounted controls for lamp on/off and directional operation.
Technical Specifications
- Light source: 10 high-flux LEDs with P-Vex lens optics
- Beam angle: 8°
- Peak beam intensity: 544,000 candela
- Maximum beam distance: 4,839 ft (1,475 m)
- Supply voltage: 12V DC
- Power consumption: 40W
- Maximum current draw: 3.7A
- Horizontal rotation: 370°
- Vertical tilt: 135°
- Mounting type: Permanent Mount
- Control: Hardwired Dash Remote
- Housing: White high-impact, UV-resistant ASA Luran polymer
- Hardware: Stainless steel fasteners
- Remote functions: Lamp on/off, aiming, home position, spotlight selection and speed control
- Hardwired control: Dash-mount controller with sealed connectors
Compatibility
Designed for 12V DC Stryker ST LED Spot installations. Permanent-mount hardware and installation require an appropriately supported mounting location. Stryker ST remote controls use a different system from Golight GT controls. The 30300 remote is for compatible Stryker ST wireless models only.
Installation & Setup
Secure the searchlight to a rigid flat mounting surface and route power wiring according to the installation guide. Mount the hardwired dash controller and route the control harness and power wiring away from heat and abrasion.
Warranty
5-Year Limited Warranty
What's in the Box
- Stryker ST LED Spot searchlight
- Hardwired dash remote controller